RS Bitukold
RS Bitukold is a rapid setting, cold applied thixotropic bitumen emulsion designed for sealing vertical joints.
- *
The cationic formulation of RS Bitukold ensures a rapid set even in cold, damp conditions, with an initial cure taking place within 15 minutes. RS Bitukold is mainly used for the protection of new joints in freshly laid asphalt or macadam.
- Transverse and longitudinal vertical joints
- Horizontal cracks in asphaltic roads
- Trench reinstatements
- Patch repairs
- Drain or manhole frames
- Kerb channels
RS Bitukold should not be applied in ambient temperatures of less than 5°C. Ensure surface is clean and free from loose material, oil, grease, standing water and weeds.
RS Bitukold can be applied by pouring from a spouted watering can or, alternatively, spray applied through the Roadmaster Sprayer.
RS Bitukold should be applied at a rate of 0.7 – 1.5kg/m2 depending upon the texture and porosity of the surface and the application method.
For joints 50mm deep, a 15kg bucket covers approximately 200 linear metres. Saw cutting the edge of the joint will maximise the rate of spread.
RS Bitukold is available in re-sealable 15kg black lidded buckets (36 x 15kg per pallet) or cardboard boxes containing 60 x 10kg bags
Protect from frost or extremes of heat. RS Bitukold has storage life of up to six months in sealed buckets under good storage conditions.
RS Bitukold is a CE Marked cationic emulsion to BS EN13808:2013 C60B3/4 or C65B3/4. RS Bitukold also complies with BS 594987 Clause 6.8 Joints, vertical face coating, and is suitable for jointing as required in clause 903.2 (iii) of the Specification of Highway Works. Full CE Marking information is available from the Colas Products website. www.colasproducts.co.uk
For full safety information, please request the RS Bitukold Safety Data Sheet 93 using the contact information at the back of this brochure.