The cationic formulation of RS Bitukold Spray ensures a rapid set even in cold, damp conditions, with an initial cure taking place within 15 minutes.
- Transverse and longitudinal vertical joints
- Trench reinstatements
- Patch repairs
- Drain or manhole frames
- Kerb channels
Ensure that the surface is clean and free from loose materials, oil, grease, standing water and weeds.
Shake can vigorously before use. Turn can upside down and apply RS Bitukold Spray in even strokes with nozzle 200-300mm away from the surface to be treated. Ensure complete coverage. After use spray briefly with can in upright position to clear nozzle.
The coverage rate for RS Bitukold Spray should be 0.7 – 1.5 kg/m2, depending on the texture and porosity of the surface.
RS Bitukold Spray is supplied in 600ml aerosol cans (12 per box).
- Caution: pressurised container, protect from sunlight
- Do not pierce or burn even after use
- Do not expose to temperatures exceeding 50°C
- Do not spray on a naked flame or any incandescent material
- Keep out of reach of children
- Store in an upright position
RS Bitukold Spray complies with BS 594987: Clause 6.8 Joints, vertical face coating.
For full safety information, please request the RS Bitukold Spray Safety Data Sheet 54 using the contact information at the back of this brochure.